Boston Gear L96Y Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 0.250 Bore

Description

Features
Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
Description
Pitch Diameter String:
24 Inches
|  Face Width:
0.20 Inches
|  Item Diameter String:
1.060 Inches
|  Bore Diameter String:
0.250 Inches
|  Number Of Teeth:
24
This steel Boston Gear L series miter gear has a 20 degree pressure angle (PA) and a straight miter to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This gear has a plain bore, is made of low carbon steel (.2 percent carbon), and has unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a 14.5 degree pressure angle, resulting in higher load capacity. This gear is intended for use only with identical gears because miter gears can mesh only with gears that have the same pressure angle, number of teeth, and diametral pitch (number of teeth per inch). This Boston Gear miter gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.
Miter gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A miter gear's pressure angle (PA), spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider when purchasing. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.
Boston Gear manufactures a variety of gear drives, variable speed drives, clutches, and the components that comprise these systems including sprockets and bearings. Their manufacturing designs, production, and inspection meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1877, is headquartered in Charlotte, NC.
Item Specifics
Brand:
Boston Gear
Size:
24 Pitch
Item Weight:
0.05 pounds
Number of Items:
1
Package Dimensions:
2.2 x 2.6 x 1.9 inches
Package Weight:
0.1 pounds
Shipping
Your item is shipped via FREE Standard Shipping within three business day.
Delivery takes 3-7 Business Days.
We only ship to physical addresses that are located within the 48 contiguous states. We are unable to ship to P.O. boxes, APO, FPO, or international addresses.
You will receive a tracking number when the item is dispatched.
Payment & Returns
We accept payment by PayPal.
If you are not satisfied with your item, please contact us for an item refund within 14 days of purchase.
In that case, please contact us for a return authorization and the return shipping address first.
Return shipping and handling is the responsibility of the buyer and returns are subject to 20% restocking fee.
In case of a defect item, we will cover the return shipping and and you'll receive a full refund.
Contact Us
Got any questions?
Please feel free to contact us anytime through eBay.
We will send you a response within 24 hours, usually sooner!
Boston Gear L96Y Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 0.250 Bore
Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
Description
Pitch Diameter String:
24 Inches
|  Face Width:
0.20 Inches
|  Item Diameter String:
1.060 Inches
|  Bore Diameter String:
0.250 Inches
|  Number Of Teeth:
24
This steel Boston Gear L series miter gear has a 20 degree pressure angle (PA) and a straight miter to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This gear has a plain bore, is made of low carbon steel (.2 percent carbon), and has unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a 14.5 degree pressure angle, resulting in higher load capacity. This gear is intended for use only with identical gears because miter gears can mesh only with gears that have the same pressure angle, number of teeth, and diametral pitch (number of teeth per inch). This Boston Gear miter gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.
Miter gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A miter gear's pressure angle (PA), spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider when purchasing. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.
Boston Gear manufactures a variety of gear drives, variable speed drives, clutches, and the components that comprise these systems including sprockets and bearings. Their manufacturing designs, production, and inspection meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1877, is headquartered in Charlotte, NC.
Item Specifics
Brand:
Boston Gear
Size:
24 Pitch
Item Weight:
0.05 pounds
Number of Items:
1
Package Dimensions:
2.2 x 2.6 x 1.9 inches
Package Weight:
0.1 pounds
Shipping
Free
Your item is shipped via FREE Standard Shipping within one business day.
Delivery takes 3-5 Business Days.
We only ship to physical addresses that are located within the 48 contiguous states. We are unable to ship to P.O. boxes, APO, FPO, or international addresses.
You will receive a tracking number when the item is dispatched.
Payment & Returns
We accept payment by PayPal.
If you are not satisfied with your item, please contact us for an item refund within 14 days of purchase.
In that case, please contact us for a return authorization and the return shipping address first.
Return shipping and handling is the responsibility of the buyer and returns are subject to 20% restocking fee.
In case of a defect item, we will cover the return shipping and and you'll receive a full refund.
Contact Us
Got any questions?
Please feel free to contact us anytime through eBay.
We will send you a response within 24 hours, usually sooner!
Why choose shopped?
New Items
Have peace of mind knowing that your order will arrive brand new in its original sealed packaging. However, please understand that the manufacturer will not honor the warranty if purchased on eBay.
Fast and Free Shipping
You're already purchasing the item. Why pay additional for shipping, especially slow shipping? It starts with getting your order shipped out nice and quick!
Commitment
We are committed to making sure that you are satisfied with your purchase. That means having access to real people that get your questions and concerns answered quickly. Give us a shot and we will make sure that you will look for us again!
Copyright 2016
shopped
All rights reserved